Vijay Instant Gas Water Heater

SALIENT FEATURES
SAFE
No Risk of Electric Shocks.
As Safe As Gas Stove.
Auto Ignition System.
Covered Burners & Flames.

CONVENIENT
Any Type of Water Can Be Used.
Hot Running Water Starts within 10 Seconds.
15 Liters At 55 Deg. C Water in Just 5 Minutes (In Winter).
Hot Water Temperature Control Through Water Inlet.
Low Maintenance – 1 Year free service by manufacture.
Compact Design & Good Aesthetics.

ECONOMICAL
MOST ECONOMICAL & FUELK EFFICENT EQUIPMENT FOR WATER HEATING.
1 Bucket of 15 Lts. At 55 Deg. C Water Cost Only 45 Paise.
70% Savings Compared to Electricity.
40% Savings Compared To Normal Gas Stove (For Water Heating).
1 Gas Cylinder Give Output Of Approx 600 Buckets Of 15 Lts. At 55 Deg.
C.
You get Bacteria Free 100% Pure Drinking Water Better Then The Bottle
Available in the Market.
As this Water 100% Safe Pure & Very Cheep, it can be used for all your
domestic use.
100% Pure Copper Plate in jacket Vessel. (Chamber) Very Special
Designed Burner-Gun Metal Parts. Complete S.S. Body.

GENERAL INFORMATION
Do Not Use Without Water.
Hot Water Outlet Should be Connected To Shower Etc.
Instant Heater Should Not be Connected To Shower Etc.
Proper Ventilation & Min. 18 Inches Distance Required From Celling.

ERECTION & COMMISSONING
Fix the equipment with four screws with the help of mounting brackets.
Connect water inlet & gas Inlet separately. ENSURE THERE IS NO LEAKAGE
FOR BOTH. Check the water outlet though controlling eater inlet.

OPERATING INSTUCTION
Start cold running water and check water outlet.
Turn the gas Knob to On position (anticlockwise) & the spark will
ignite the burners.
In case it does not ignite in 1 stroke in the beginning, IMMEDIATELY
TURN THE KNOB TO OF & REPEAT THE SAME. DO NOT KEEP KNOB ON. AFTER
PRATICE OF 5 TO 10 TIMES YOU WILL BE USED TO GAS & SPARK
SYNCHRONOZATION SYSTEM.
Adjust the outlet water temperature through water inlet control.
After finishing your work turn the has knob to OFF position & wait
till cold water comes out from outlet, then only stop water inlet. DO
NOT ALLOW HOT WATER TO REMAIN INSIDE THE GEYSER.

DO NOT TOUCH THE TOP PORTION OF THE GRYSER IN WORKING CONDITION AS IT REMAINS
HOT.

For More Detail Please Contact.

Thanking You.

Vijay Makwana

Vijay engineering

Mumbai, India.

http://www.vijayengineering.in